HSC1 series AC contactor

Installation site altitude not exceeding 2000m

The upper limit of ambient temperature is +55 DEG C, the lower limit is -25

The air relative humidity at the installation site shall be no more than 50% at the maximum temperature of +40 degrees celsius and can have a higher relative humidity at a lower temperature,for example air relative humidity can reach up to 90% under 20 degrees celsius.Special measures should be taken when changing temperature produces condensation.

Installation site pollution level of 3

The main circuit of the installation class is III, and the rest of the control and auxiliary circuits are Ⅱ

Installation method : Vertical installation, Inclination of the mounting surface ≤±22.5°

Table 1

Model				HSC1-6.3	HSC1-9M	HSC1-9	HSC1-12	HSC1-16	HSC1-25	HSC1-32	HSC1-40
Rated insulation voltage Ui V				690
Rated heating Current Ith A				16		20		30		45
Rated working Voltage Ue V				230 400 690
Rated working current Ie A	AC-3		230V	6.3	9	9	12	16	25	32	40
			400V	6.3	9	9	12	16	25	32	40
			690V	3.5	6.9	6.9	9.1	12.5	12.5	22.1	22.1
	AC-4		230V	5	6.3	6.3	9	12	16	25	32
			400V	5	6.3	6.3	9	12	16	25	32
			690V	2.8	5	5	6.7	8.9	8.9	17.8	17.8
Control motor power Kw AC-3			230V	1.7	2.2	2.2	3.0	4.0	6.1	8.5	11
			400V	3.0	4.0	4.0	5.5	7.5	11	15	18.5
			690V	3.0	5.5	5.5	7.5	11	11	18.5	18.5
mechanical endurance Million times				1000
Long-life electrical AC-3 Million times AC-4				100 5
Million times AC-3 次/h AC-4 No load				800 250 7000
Operating	Rated voltage Us			36V 110V 127V 230V 400V
	Start power consumption VA			32		70		102		120
	Holding power consumption VA			5		8		12		15
	Energy efficiency grade			3		3		3		3
Top mounted auxiliary contact				Model Form CA122 2NO2NC CA131 3NO1NC CA140 4NO		Model Form CA222 2NO2NC CA231 3NO1NC CA240 4NO
Side mounted auxiliary contact				–		Model:CA411 Form：1NO1NC
Delay module (Top mounting)		Delay on		–		Model：TE1-3 TE1-30 TE1-180 Delay range：0.1～3s 1～30s 10～180s
		Delay off				Model：TE2-3 TE2-30 TE2-180Delay range Delay range：0.1～3s 1～30s 10～180s
Communication interface module				–
Surge suppression module				–
Surge suppression module				–		ML1

continued Table 1

Model				HSC1-50	HSC1-63		HSC1-75	HSC1-95	HSC1-110		HSC1-140	HSC1-170	HSC1-205
Rated insulation voltage Ui V				690
Rated heating current Ith A				70			95		140			205
Rated heating current Ith A				230 400 690
Rated working current Ie A	AC-3		230V	50	63		75	95	110		140	170	205
			400V	50	63		75	95	110		140	170	205
			690V	34.6	34.6		61	61	110		118	170	170
	AC-4		230V	40	50		63	75	90		110	140	170
			400V	40	50		63	75	90		110	140	170
			690V	25	25		52.8	52.8	60		95	100	122
Control motor Power Kw AC-3			230V	15	18.5		22	22	37		45	55	64
			400V	22	30		37	45	55		75	90	110
			690V	30	30		55	55	75		110	156	156
mechanical endurance Million times				1000
mechanical endurance Million times AC-3 Million times AC-4				100 5
Million times AC-3 times/h AC-4 No load				800 250 7000		800 250 5000				750 250 5000		700 200 5000	500 130 5000
Operating coil	Rated voltage Us			36V 110V 127V 230V 400V
	Start power consumption VA			190			275		387			906
	Holding power consumption VA			20.5			30		33			4.0
	Energy efficiency grade			2			2		2			2
Top mounted auxiliary contact				Model Form CA322 2NO2NC CA331 3NO1NC CA340 4NO								–
Side mounted auxiliary contact				Model:CA511 CA520 CA502 Form：1NO1NC 2NO 2NC
Delay module (Top mounting )		Delay on		–			Model：TE1-3 TE1-30 TE1-180 Delay range：0.1～3s 1～30s 10～180s					–
		Delay off					Model：TE2-3 TE2-30 TE2-180 Delay range：0.1～3s 1～30s 10～180s
Communication interface module				TX1
Surge suppression module				RC1
Mechanical locking module				ML1								–

continued Table 1

Model				HSC1-250	HSC1-300	HSC1-400	HSC1-475	HSC1-630	HSC1-800
Rated insulation voltage Ui V				690
Rated heating current Ith A				300		400	475	630	800
Rated working voltage Ue V				230 400 690
Rated working current Ie A	AC-3		230V	250	300	400	475	630	800
			400V	250	300	400	475	630	800
			690V	205	250	300	400	630	800
	AC-4		230V	205	250	300	300	570	570
			400V	205	250	300	270	520	520
			690V	160	160	190	190	362	362
Control motor power Kw AC-3			230V	78	93	125	145	191	250
			400V	132	160	200	250	335	450
			690V	190	235	275	375	573	750
mechanical endurance Million times				600
Long-life electrical AC-3 Million times AC-4				60 5
Operating frequency AC-3 次/h AC-4 No load				700 200 3000	500 130 3000	500 150 2000	400 150 2000	500 150 1000
Operating coil	Million times Us			36V 110V 127V 230V 400V
	Start power consumption VA			906		620		1018
	Holding power consumption VA			4.0		11		14
	Energy efficiency grade			2		2		2		–
Top mounted auxiliary contact				–
Side mounted auxiliary contact				Model:CA511 CA520 CA502 Form：1NO1NC 2NO 2NC
Delay module (Top mounting)		Delay on		–
		Delay off
Communication interface module				TX1
Surge suppression module				RC1
Mechanical locking module				–

notes:

HSC1-6.3 ~ 12 also can provide the four poles
Mechanical locking module does not separate supply and must be matched with the contactor. When not specified, auxiliary contacts with 1 open and 1 closed
GB21518 suitable 《 AC contactor energy efficiency limit value and energy efficiency grade 》 for rated operating current 6A ~ 630A AC contactor
The reversible AC contactor has the same parameters as the standard

Table 2

Table 2		HSC1-25C	HSC1-40C	HSC1-63C	HSC1-95C
Rated insulation voltage Ui		690V
Rated heating current Ith		30A	45A	70A	95A
Rated working voltage Ue		230V 400V
Rated working current Ie	230V	25	40	63	95
	400V	25	40	63	95
AC-6b Rated control capacity kvar	230V	10	15	25	35
	400V	15	30	45	60
Surge suppression capability		≤20Ie
mechanical endurance Million times		100
AC-6b Long-life electrical Million times		10
Operating frequency times/h		240		120
Operating coil characteristics and power consumption		AC contactor with HSC1 serie
Auxiliary contact （ Side loading ）		Factory configuration:CA411 1只 Optional installation :CA411 1只		Factory configuration:CA511 1只 Optional installation :CA511 or CA52 or CA502 1只
Equipped with a fuse model		RT16-50	RT16-63	RT16-125	RT16-160

Products

Table 1

continued Table 1

continued Table 1

notes:

Table 2

Related Products

HSD1 series electronic motor protector

HSK6-63 control and protection switch

HSJR1 series thermal overload Relay

HSC2 series AC contactor